background image

S-420/ S-900DD DOCK SHELTER FASTENERS 

WARRANTY 

 

4Front Engineered Solutions, Inc. expressly warrants that this Dock Seal or Shelter will be free from defects in materials 
and workmanship under normal use for a period of one (1) year from the earlier of 1) 60 days after date of shipment by 
4Front Engineered Solutions, Inc. or 2) the date of installation of the Dock Seal or Shelter by the original purchaser, 
provided the product is properly applied and installed.  In the event this Dock Seal or Shelter proves defective in material 
or workmanship, 4Front Engineered Solutions, Inc. will, at its option: 

 

 

1. 

Replace the Dock Seal or Shelter or the defective portion thereof without charge to the purchaser; or 

 

2. 

Alter or repair the Dock Seal or Shelter, on site or elsewhere, without charge to the purchaser. 

 

The warranty stated in the preceding paragraph is the sole and exclusive warranty for this product AND IS IN LIEU OF 
ALL OTHER GUARANTEES AND WARRANTIES, EXPRESS OR IMPLIED.  This warranty does not cover any failure 
caused by improper installation or application, abuse, or negligence.  Parts requiring replacement due to damage 
resulting from vehicle impact, abuse or improper installation are not covered by this warranty.  Seller assumes no 
responsibility or liability for (1) consequential damages of any kind which result from the use or misuse of the Dock Seal 
or Shelter, (2) damage or failure resulting from the use of unauthorized replacement parts or modification of the Dock 
Seal or Shelter; (3) damage resulting from the misuse of the Dock Seal or Shelter.  

THERE ARE NO WARRANTIES, 

EXPRESS OR IMPLIED, WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF, AND THERE IS 
NO WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. 

 

DryDock, Serco, SnapBack, Ultra Dock Shelter, Ultra Seal, and WeatherAll are registered trademarks of 4Front Engineered Solutions, Inc.  
Serco Steel is a trademark of 4Front Engineered Solutions, Inc. 

COVERED BY PATENT # 6,170,204, OTHER PATENTS PENDING

 

Summary of Contents for S-420









Reviews: