6
Operation
User Manual
SERENE SC112G
2
Operation
Automatic Start-Up
After the chiller has been positioned in a suitable place, plug it in and check
the following activity.
Loading Product
Let the chiller run for 30 minutes before loading it with product the first time.
When loading the cabinet shelves with product:
Allow adequate air space around each item to ensure even cooling and
efficient operation of the chiller.
Remove some product if the shelves are flexing. The maximum loading
for each shelf is 25kg.
Do not let anything overhang the shelves, this might stop the doors from
shutting or even break something.
Door Lock
The chiller is fitted with security door locks. Use the supplied keys to lock
and unlock the door as necessary.
Lighting
The cabinet interior is lit by four corner LED strip lights. The lights will switch
on and off depending on chiller usage. The lights can also be manually
switched on and off using the light button on the electronic controller
faceplate (see page 7).
Item
Activity
Condenser fan
The condenser fan starts immediately and can be heard.
Evaporator fan
The evaporator fan will start after a few seconds. The
evaporator fan turns off when the front door (electronic
controller) is opened and turns on again when the front
door is closed.
Lighting
The lights that illuminate the cabinet interior will come on
when the chiller is turned on.
Compressor
The compressor will start after a few minutes. The
compressor turns off when the product temperature
r2°C and turns on when the product temperature
rises to +5°C.
Front panel
Door lock keyhole
