www.SerenLifeHome.com
e. Maintain power tools. Check for misalignment or jammed moving parts,
breakages or any other feature that might affect the operation of the
power tool. If it is damaged, the power tool must be repaired. Many
accidents are caused by using poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to jam and are easier to control.
g. Use the power tool, accessories and cutting tools, etc., in accordance with
these instructions and in the manner intended for the particular type of
power tool, taking into account the working conditions and the work
which needs to be done. Using a power tool in ways for which it was not
intended can lead to pote- ntially hazardous situations.
5. Service
Your power tool should be serviced by a qualified specialist using only
standard spare parts. This will ensure that it meets the required safety
standards.
5
WARNING:
Take care not to expose this tool to rain and remove plug
from mains supply immediately if the supply cable is damaged.
WARNING: DO NOT OPERATE THIS TOOL WITH COLLECTION BAG
REMOVED.
Serious injury from the fan or flying debris could result.
WARNING: DO NOT OPERATE THIS TOOL WITH VACUUM/BLOWER
TUBE REMOVED.
Serious injury from the fan or flying debris could
result.
WARNING:
Electric shock could occur if used on wet surfaces. Do not
expose to rain. Store indoors.
WARNING:
Always wear eye protection to prevent rocks or debris
from being blown or ricocheting into the eyes or face which can
result in blindness or other serious injury.