11
battery packs in direct sunlight or near heat sources.
4. If the battery pack does not charge properly – (1) check current at
receptacle by plugging in a lamp or other appliance. (2) move charger
and battery pack to a location where the surrounding air temperature is
approximately
64.4-75.2°F
. (3) if charging problems persist, take or send
the tool, battery pack and charger to your local service center.
5. The battery pack should be recharged when it fails to produce sufficient
power on jobs which were easily done previously.
DO NOT CONTINUE
to use under these conditions. Follow the charging
procedure. You may also charge a partially used pack whenever you
desire with no adverse affect on the battery pack.
6. Under certain conditions, with the charger plugged in to the power
supply, the exposed charging contacts inside the charger can be shorted
by foreign material. Foreign materials of a conductive nature such as, but
no limited to, steel wool, aluminum foil, or any buildup of metallic
particles should be kept away from charger cavities. Always unplug the
charger from the power supply when there is no battery pack in the
cavity. Unplug charger before attempting to clean.
7.
Do not immerse charger in water or any other liquid.
8.
WARNING!
Don’t allow any liquid to get inside charger. Electric shock
may result. To facilitate the cooling of the battery pack after use, avoid
placing the charger or battery pack in a warm environment such as in a
metal shed, or an uninsulated trailer.
www.SerenLifeHome.com
Summary of Contents for PSLTLL1854
Page 14: ......
