www.SereneLifeHome.com
4
HARDWARE LIST & ASSEMBLY COMPONENT
ASSEMBLY INSTRUCTIONS
STEP 1
It is recommended to have a second person assist with this step. Lift both Right and Left Handlebar Support
Tubes up. One person should hold the both Right and Left Handlebar Support Tubes in place while the
other person tightens the bolts. Lift both Right and Left Handlebar Support Tubes up and align bolt holes.
Use two M8x50 Hexagon Socket Oval Head Bolts (S1) and two M8 Spring Washers (S2) to secure both Right
and Left Handlebar Support Tubes onto the Base Frame.
Use two M8x16 Hexagon Socket Oval Head Bolts (S3) to secure both Right and Left Handlebar Support
Tubes onto the Base Frame. Semi-tighten all bolts with the Allen Wrench provided.
NOTE: DO NOT FULLY TIGHTEN BOLTS IN STEP 1 UNTIL STEP 2 IS COMPLETED.
Nylon Nut M8
X 2
Safety Tether Key
X 1
Hexagon Socket Oval
Head Bolt M8x50
X2
Spring Washer M8
X2
M8x16 Allen Bolt
X 4
S1
S2
S6
S4
S5
S3
M8x30 screw
X1
Allen Wrench
Multi Hex Tool with
Phillips Screwdriver
X1
X 1
TOOLS
S1
S2
S3
