background image

www.SereneLifeHome.com

14

6. Error Message Code

ERROR

CODE

FAULT

DESCRIPTION

SOLUTION

ER 01

ER 03

ER 05

Communication

error protection

Malfunction

suddenly

Overcurrent

protection

Overload 

protection

1. Check for loose, dropped or damaged 

    communications lines.

2. Check or replace the electronic watch board.

3. Check or replace the controller.

1. Please check whether the line is plugged in and you 

    need to restart it.

2. Check or replace the controller.

1 Check for overload.
2. Check if the mechanical moving parts are stuck.
3. Check if there is a lack of release agent. If there is a
    lack of release agent, the friction between the running
    belt and the running plate will increase.
4. Check the running plate for serious wear.
5. Check the running belt for serious wear.
6. Check if the motor cable is short-circuited.
7. Check or replace the controller.
8. Check or replace the motor.

ER 07

Security

lock off

1. Check if the security lock is in place and safety switch

    is in position.

2. Check if the safety lock is good, and the magnetic

    ring pipe is broken and replaced.

ER 08

Hardware

over-current

protection

1. Check if the motor is overloaded.

2. Need to reboot to eliminate.

Summary of Contents for SLFTRD70






















Reviews: