THIS APPLIANCE HAS A POLARIZED PLUG
(ONE BLADE IS WIDER THAN THE OTHER). TO REDUCE
THE RISK OF ELECTRIC SHOCK, THIS PLUG IS
INTENDED TO FIT IN A POLARIZED OUTLET ONLY
ONE WAY. IF THE PLUG DOES NOT FIT FULLY IN THE
OUTLET, REVERSE THE PLUG. IF IT STILL DOSE NOT FIT, CONTACT A QUALIFIED
ELECTRICIAN TO INSTALL THE PROPER OUTLET.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS SAFETY FEATURE
IN ANY WAY.
PARTS
1.
Heating Pad
2.
Pad Connector
3.
Control Connector
4.
Control
5.
Power Cord/Plug
HOW TO USE YOUR HEATING PAD
Before each use, always inspect the product to ensure
there is no damage to the power cord, the Control, or the
Pad. The Pad Connector and Control Connector are
designed to connect only one way. Align the inner prongs
and then push together until Connectors are
1. Secure (see Fig. 1).
2. Plug the product into a 120-volt AC electrical outlet.
NOTE:
If there is no power, make sure the AC electrical outlet is functional and
the connection in step 1 is secure. Discontinue use if failure continues.
3. Use the Control to set the heat at the desired level (see Fig. 2).
NOTE:
Heat levels are “105” (low), 115 through 145, and “155” (high).
1
2
3
4
5
Fig.1
Fig.2
www.SereneLifeHome.com
4
