Fig.3
Press the
ON/OFF
Button on the Control. The display will illuminate, the all icon
will displayed for 1.5 seconds.
4. “105°F” will display, indicating the Control
is set at the lowest heat setting, “60m” will
display, indicating the Control is set at the
60 min auto off (see Fig. 3).
WARNING:
Burns can occur regardless of the control setting. Check skin under Pad frequently.
5. To change the heat setting, press the “
+
” Button for a
higher heat level or the “
-
” Button for a lower heat level.
The desired heat level and the heat mode icon will
appear for about 3 seconds, and then display the real-
time temperature of the pad. (see Fig. 4).
6. Display of Settings, display as 6 setting, display as 3
setting.
NOTE:
If the Control shuts off, make sure the Pad and Control connectors are
securely connected and re-start the product by pressing “ ”.
7. Place the Pad on top of the body. If the Pad does not evenly heat, make sure
there are no folds or bunched up areas.
8. Turn the product off by pressing the Button and unplug it when it is not in use.
AUTO OFF FUNCTION
This product willturn off after a set duration of time.
Settings are 0.5 hour (30 minutes), 1.0 hour and 1.5 hours (90 minutes).
WARNING:
Burns can occur regardless of the control setting; check skin under
Pad frequently. Unplug the product when it is not in use.
1. After turning the Pad on and selecting the desired heat setting
(steps 4 and 5 above), press the “ ” Button or the “ ” Button
until the desired amount of time is displayed. The display will
illuminate the desired amount of time (for example “60m”),
Time numerical display flickers for 3 seconds, and then the
desired time setting will display steadily (see Fig. 5).
Fig.4
Fig.5
www.SereneLifeHome.com
5
