www.SereneLifeHome.com
www.SereneLifeHome.com
CAUTION
•
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER.
THERE ARE NO SERVICEABLE PARTS INSIDE.
•
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
The lightning flash with arrow-head symbol within an equilateral
triangle is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the unit' 5 enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to
alertthe user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the unit.
•
It must only be supplied at safety extra low voltage corresponding to the
marking on the appliance
•
The appliance has a heated surface. Persons insensitive to heat must be
careful when using the appliance.
IMPORTANT SAFETY INSTRUCTIONS
When using the massage seat topper, basic precautions should always
be followed,including the following:
Read all instructions before using this massage the
SLMSGCH10
:
DANGER
To reduce the risk of electric shock:
1. Always unplug the appliance from the electrical outlet immediately after
use and before cleaning.
2. Never use pins or other metallic fasteners with this appliance.
3. Keep dry — Do not operate in a water or moist condition.
TROUBLESHOOTING
8
9
Problem
Possible Cause/Action
Frictional sound of rollers
against backrest cover.
Motor sound during
operation.
Sound of air.
The Massager does not start
operation.
The massage rollers stop
during the massage session.
These sounds are the result of mechanical
structure and not malfunction.
This may occur during normal operation.
The Massage does not start operation.
Ensure that the Power is ON.
Ensure that the power plug is firmly
connected to the electrical outlet.
Ensure power adapter is firmly connected
to power cord
Check that the voltage at the electrical
outlet is adequate.
After prolonged use, Massage motors
may need to cool down to protect them.
The roller mechanism may be stalled
when subjected to excessive force.
Release excessive force on the rollers.
