background image

www.SereneLifeHome.com

4

www.SereneLifeHome.com

5

HOW TO OPERATE

How to operate power supply

1. Charging of the built-in rechargeable battery.

     The built-in rechargeable battery can serve as the power supply when the    
     external power supply is not used.

2. Power supply with the built-in rechargeable battery

 

     (applicable to rechargeable ones) When it is not used as an external power    
     supply, it could be used for power supply.

FUNCTIONS

1. Shift the toggle switch to "

ON

" position and then apply the massager close to  

     your neck; if there is some sweat on your neck, please clear them before use.
2. Hold the remote control and press the button "     " to boot it; after you hear the  
     buzzer beeps once, the power supply indicator will be on and the default    

     

program is enabled. The massager will work under Impulse Mode 1, Intensity 01

  

     

and Level 2 of thermal moxibustion, with the default time period of 15 minutes;

  

     now you could use the remote control to adjust to the massage mode and    
     intensity you desire.

3. Press the "    " pulse mode button to select 1-6 mode, 0 is the stop mode. 

     The "

+

" button is to increase the intensity, with one level increase for each time  

     

of pressing it; the "

-

" button is to decrease  the intensity, with one level decrease  

     for each time of pressing it. There are 16 levels for adjustment. 

     The default level is level 1 when booting.
4. The button "   " is to select the thermal moxibustion mode. And the "

0

" means  

     stopping thermal moxibustion, while the "

1

" means  low temperature and the  

     "

3

" high temperature. It defaults to "

2

" when booting.

5. 

After the massage is completed, please shift the toggle switch to "

OFF

" position  

     to power off the massager; then, stick the electrode slices on the storage board  

     for storage in a dry, well-ventilated place for next use.

6. When the battery runs low, please charge it with the power adapter provided  
     for the massager; otherwise, the massager will be off automatically after the   

     indicator flickers for alarm.
7. When the remote control backlight flickers or becomes insensitive, it is 

     recommended to replace the button battery (3V, CR2032 type, and others are  
     not allowed); the normal service life of the battery is more than three months.

Attention: 

When you use the remote control to operate the massager, the IR 

receiving window on the massager and the IR sending window on the remote 
controlcannot be shielded; furthermore, please aim the remote controlat the 
receiving window as much as possible to get the best sensitivity.

Reviews: