Fig. A
Fig. B
Fig. C
Fig. D
www.SereneLifeHome.com
2
www.SereneLifeHome.com
4
www.SereneLifeHome.com
5
PARTS DESCRIPTIONS:
INSTALLATION
1. Put the main body up-side-down (Fig. A). Slide Deco. Board (#2) onto Base
Bracket (#1). Put the plug (#9) and power supply cord through the holes on the
center of Base Cover (#3) and Base (#4). Then slide Base Cover (#3) , Base (#4)
and Washer (#6) onto Base Bracket (#1) respectively.
2. Fix Washer (#6), Base (#4), Base Cover (#3) and Base Bracket (#1) with Screw
M6*20 (#5). Clip the power supply cord with Cord Clip (#8) and fix it onto Base
(#4) with Screw (#7).
OPERATIONS:
1. Plug in the unit to a socket. Make sure the power supply is same as rated.
2. Press Heater Switch to switch on or off the heater.
CAUTIONS:
1. High temperature, keep combustible material such as furniture, papers, clothes,
curtains at least 3 feet (0.9m) from the front of the heater and away from the
side and rear.
2. The unit must be securely placed on a horizontal and flat surface.
3. The unit is at high temperature during operation. It keeps hot for a period after
shut down. Potential danger would occur when touching it during this period.
4. Don't place the unit close to curtain and/or other flammable objects otherwise
there will be a danger of catching fire.
5. Don’t cover the unit with anything during operation or a short time after it's
shut down.
6. Don't wrap the power supply cord on the unit.
7. The unit must be handled with care, and avoid of vibration or hitting.
8. The unit must be securely grounded during operation.
9. When damaged, the unit must be repaired by professional repairing team.
10. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
11. The heater must not be located immediately below a socket-outlet.
12. When assembling, keep clear from any board or flammable material.
13. Do not use this heater with a programmer, timer or any other device that
switches the heater on automatically, since a fire risk exists if the heater is
covered or positioned incorrectly.
