4
SETTING THE MASTER CODE
SECURITY DISPLAY FEATURE
TAMPER ALARM
•
With the door open, press “#” key to start the keypad, then press "0" twice, and then
press reset button once, LCD will show "------" with "BI" sounds twice.
•
Input your new master code(3-8 digits), and press "#" to confirm.
•
LCD will read “IN”,which means the new code is accepted successfully.
Your safe is equipped with a security display feature, using this feature means that
your code will not be displayed on screen when opening safe.
•
Press “#” to startup the lock.
•
Press “*” in touch screen to startup the hidden code function. Any code you input
will show “----“in the display, which can ensure your code safe.
•
You can press “*” twice to cancel this function.
•
You may set a tamper alarm that will sound if anyone attempts to move or attack
the safe.
•
Press the “*” key, the display will show “ALERT on”.
•
The safe will alarm when it is vibrated. To turn alarm off, press the “#” key, input the
current code, and then press “#” to confirm. If code is wrong though, the alarm will
stop after 20 seconds, but the warning state is not released (It will alarm once it is
vibrated).
SETTING THE USER CODE
•
With the door open, press the reset button once, LCD will show “------” with “BI” sounds.
•
Input your new user code(3-8 digits), press “#” key to confirm.
•
LCD will read “IN” with “DI-DU” sounds, which means the new code is accepted
successfully.
Summary of Contents for SLSFE348
Page 1: ...Models SLSFE348 INTELLIGENT ELECTRONIC SAFE USER MANUAL...
Page 6: ......
