background image

www.SereneLifeHome.com

1

Please read the manual carefully before installing or operating the Portable 
Mono Solar Panel Starter Kit to prevent personal injury or damage to the 
components. Contact Technical support for any questions concerning the 
installation.

INTRODUCTION

This manual provides the installation and operation instructions for users:

 • 

Please carefully read this manual before installation, operation and maintenance  

    of our solar system. This manual includes all the important information and data,  
    and in order to guarantee the good performance of this system, please strictly  
    follow the instructions in this manual.

 • 

We are not responsible for any consequences caused by wrong installation or  

    operation which does not correspond to this manual.

 • 

Please keep this manual for future reference. In case of any questions or need  

    further assistance, please contact us or our agencies as well.

STORAGE & OPERATING CONDITIONS

Storage

To avoid potential dangers, the following notes must be followed:

 • 

Storage environment should be ventilated and dustless.

 • 

Relative humidity is less than 90%, and no water droplets.

 • 

Keep away from fire or any corrosive substances.

Operating Conditions

Operating Temperature

 • 

Controller and inverter: -20°C - 50°C (-4°F - 122°F)

 • 

Solar panel: -40°C - 85°C (-40°F - 185°F)

SAFETY PRECAUTIONS

 • 

Installation staffs should use insulating equipment (e.g. insulating shoes, insulating  

    gloves) to avoid electric shock.

 • 

Solar panel is heavy and should always be handled by two people, and it contains  

    glass, which can be easily broken if mistreated, such as place heavy loads or drop  
    objects on its surface. .

 • 

When working at height, appropriate protective safety equipment as recommended  

    by local safety codes (e.g. hard hat, scaffolding, safety rope) should be used.

 • 

Do not install the module if the back sheet or glass is damaged because there is  

    an electrical and fire risk.

 • 

Do not attempt any installation in adverse weather conditions (e.g. high winds,  

    rain or when ice or snow is present).

Summary of Contents for SLSPSKT100















Reviews: