www.SereneLifeHome.com
6
CONTROLLER MANUAL
SAFETY INSTRUCTIONS
•
This controller is a 12V/24V controller. Make sure your battery has enough voltage
(12V/24V) for the controller to identify the correct battery type before first
installation.
•
Install the controller as close as possible to the battery to avoid voltage drop
caused by long wire and affect normal voltage judgment.
•
The controller is suitable for 12V/24V lead-acid batteries, lithium-ion batteries
and LiFePO4 batteries. Please note that the corresponding battery type (default
lead-acid batteries) is selected in the menu.
•
This controller can only use solar panel as charging source. Do not use DC or other
power sources.
•
This controller will be heated when it is operating. Please pay attention to installing
the controller on a flat, well-ventilated surface.
PRODUCT FEATURES
•
The main control chip of industrial level is adopted.
•
Large LCD display, adjustable parameters.
•
Complete three-stage PWM charging management.
•
Build-in over-current/short-circuit protection, open-circuit protection and reverse
connection protection are all self-recovery type without damaging the controller.
•
Dual MOS anti-backfilling circuit, low heat release.
LCD DISPLAY/KEY
VOLTAGE
TEMPERATURE
HOUR
AMPERE
LOAD
SYMBOL
OUTPUT
SYMBOL
BATTERY CAPACITY
CHARGING SYMBOL
SOLID ON: BULK CHARGE
FLASHING: FLOAT CHARGE
SOLAR PANEL
DISPLAY AREA
