www.SereneLifeHome.com
7
SYSTEM CONNECTION
•
Connect the battery to the controller with the correct polarity.
•
Connect the solar module to the controller with the correct polarity.
•
Connect the load to the controller with the correct polarity.
The reverse order applies
when uninstalling!
Improper sequence can
damage the controller!
INTERFACE / SETINGS
MENU:
Switch between different interface, or to enter/exit parameter
setting by pressing and hold.
UP:
Press to increase value
DOWN:
Press to decrease value
Main interface. It can display battery voltage, battery power, charging
and discharging status. Press the MENU key to enter the next
interface.
Temperature interface. If the temperature of the controller rises due
to over-current or poor heat dissipation during operation, it will stop
working and return to normal when the temperature falls back.
