background image

www.SereneLifeHome.com

6

 If the swing is hung from swing set frame, then lubricate all metallic       

  moving parts, that are attached by a metal connection.

 If the swing is hung from a tree branch, then rake and check depth of    

  loose-fill protective surfacing materials (such as mulch or sand) to prevent  
  compaction and to maintain appropriate depth (Min amount is 9.84 inch),  
  replace as needed.

Twice a month during play season, adults should:

 Tighten all hardware

 Check all protective covering on pipes, edges and corners. Replace if they  

  are loose, cracked, or missing.

 If the swing is hung from a tree branch, then rake and check depth of    

  loose-fill protective surfacing materials (such as mulch or sand) to prevent  
  compaction and to maintain appropriate depth (Min amount 9.84 inch)  
  Replace as needed.

Once a month during play season, adults should:

 Check all moving parts including ropes for wear or other deterioration.

  Replace as needed.

 If the swing is hung from a tree branch, then rake and check depth of    

  loose-fill protective surfacing materials (such as mulch or sand) to prevent  
  compaction and to maintain appropriate depth (Min amount 9.84 inch)  
  Replace as needed.

At the end of each play season, or when the temperature fall below   
39.2 °F adults should:

 Remove the swing from its outdoor location.

 Store the swing in a dry environment.

Disposing of the Swing

To dispose of the swing, first disassemble it. Dispose of it in such a way that 
no unreasonable hazards will exist at the time that the swing is discarded.

This confirms to ASTM, Consumer safety performance specification for 
home playground equipment.

Summary of Contents for SLSWNG350PK









Reviews: