13
The quick-start section is not a replacement for
the full instructions. To be able to use the model
to its best take the time to read the full manual.
1.
Read the manual and safety
pre-cautions ( page 3)
2.
Buy and charge the battery packs:
read both battery manual and
charger manual carefull before !
3.
Buy and install the batteries in
the transmitter ( page 6)
4.
Install battery pack in the model,
make sure the speedo is switched off,
connect the cables (avoid reversed polarity)
and securely fasten the battery-pack.
5.
Turn on the transmitter (page 6).
Always turn on the transmitter first before
to switch on the car and only turn off
the transmitter after you switched off the car.
6.
Check servo operation.
Check that the servo works correctly and check that
the car runs straight in neutral position, trim as needed.
7.
Perform a range test with the radio system
8.
Personalise the body of your car by applying
more decals if required.
9.
Drive your modelcar.
10.
Maintain your modelcar (page 18)
Quick-start
