Page
7
STEP
6
STEP
7
STEP
8
1
1
2
M3X8
M3X8
M3X6
M3X3
M5X4
2.5x5
Wide
thread
8x11x0.2
Note:
Check for free movement
Note:
After building the differential with new
gears a new differential case and bearings,
the differential may feel a little tight. The
connected parts need at least an hour run-
time to create a perfect match. Attention:
When you assemble the diff with too much
initial play, the gears will not run-in properly
and may wear quickly. After 1 or 2 hours
of running the car, re-check the gear-mesh
between the ring gear and the pinion. All
parts should have run-in properly now. You
may ad one or more extra shims on the
pinion or ring-gear, start of by placing 1 x
0.1mm more, and try again.
Bag
2
REAR ASSEMBLY
Summary of Contents for Cobra GT 3.0
