Note the correct grommet position.
diff may feel a little tight. The connected parts need at least an hour run-time to create
a perfect match. Attention: When you assemble the diff with too much initial play,
the gears will not run-in properly and may wear quickly. After 1 or 2 hours of running the car,
re-check the gear-mesh between the ring gear and the pinion. All
parts should have run-in properly now. You may add or remove
8x11x0.1 shims as needed.
8x11x0.1
11
STEP 14
P 15
STE
BAG 2
2.5x13
14.1
14.2
2.5x13
M5x6
M3x14
M3x12
flanged
M5x6
5x13x4
NSK
8x16x5
NSK
8x16x5 NSK
5x13x4 NSK
M3x14
M3x12 Flanged
8x11x0.1