8x11x0.1
After building the differential with new gears, new differential
case and bearings, the diff may feel a little tight. The connected
parts need at least an hour run-time to create a perfect match.
Attention: When you assemble the diff with too much initial play, the
gears will not run-in properly and may wear quickly. After 1 or 2 hours
of running the car, re-check the gear-mesh
between the ring gear and the pinion. All parts
should have run-in properly now. You may
add or remove 8x11x0.1 shims as needed.
18
STEP 26
P 27
STE
BAG 6
2.5x13
M5x6
5x13x4
NSK
8x16x5
NSK
2.5x13
M5x6
8x16x5 NSK
5x13x4 NSK
M3x22
M3x16
13x16x0.1
13x16x0.1
13x16x0.1
M3x22
M3x16
26.1
26.2
27.1
27.2
8x11x0.1
After 1 or 2 hours
of running the car,
re-check the gear-
mesh between the ring gear
and the pinion. All parts
should have run-in properly.
You may add or remove
13x16x0.1 shims as needed.