86
Operations
-48 VDC Remote Power Manager
Installation and Operations Manual
Enabling or disabling strong passwords:
The Set Option Strong Password command enables or disables the requirements for strong passwords. When enabled,
all new passwords must be a minimum of 8 characters in length with at least one uppercase letter, one lowercase letter,
one number and one special character.
To enable or disable strong passwords:
At the Switched -48 VDC: prompt, type
set option strongpasswords
, followed by
enabled
or
disabled
and press
Enter
.
Enabling or disabling the external configuration reset button:
The Set Option Button command enables or disables the external configuration reset button. This feature can enhance
system security by protecting the configurations from being reset locally.
NOTE:
If this feature has been enabled and the administrative account username/password has been lost, then the unit must be returned to
the factory for non-warranty reset of the configuration.
To enable or disable the configuration reset button:
At the Switched -48 VDC: prompt, type
set option button
, followed by
enabled
or
disabled
and press
Enter
.
Enabling or disabling the ‘more’ prompt:
The Set Option More command enables or disables the ‘more’ prompt for display of data larger than the terminal
window.
To enable or disable ‘more’:
At the Switched -48 VDC: prompt, type
set option more
, followed by
enabled
or
disabled
and press
Enter
.
Setting the temperature scale:
The Set Option TempScale command sets the temperature scale that the unit will report in.
To set the temperature scale:
At the Switched -48 VDC: prompt, type
set option tempscale
, followed by
celsius
or
fahrenheit
and press
Enter
.
Configuring the Command Line Interface (CLI) session timeout:
The Set Option CLI Timeout command configures the CLI session timeout in minutes.
The valid timeout range is 1 to 1440 minutes (24 hours). The default session timeout is 5 minutes.
To configure the CLI Session Timeout:
At the Switched -48 VDC: prompt, type
set option clitimeout
, followed by the session timeout (in minutes), and press
Enter
.
Example:
The following command sets the CLI session timeout to 15 minutes:
Switched -48 VDC: set option clitimeout 15<Enter>
Configuring the web session (Web Interface) timeout:
The Set Option Web Timeout command configures the Web session timeout in minutes.
The valid timeout range is 1 to 1440 minutes (24 hours). The default session timeout is 5 minutes.
To configure the web session timeout:
At the Switched -48 VDC: prompt, type
set option webtimeout
, followed by the session timeout (in minutes), and
press
Enter
.
Example:
The following command sets the web session (Web Interface) timeout to 10 minutes:
Switched -48 VDC: set option webtimeout 10<Enter>