88
Operations
-48 VDC Remote Power Manager
Installation and Operations Manual
Displaying tower information:
The Show Towers command displays information about the -48 VDC unit. This information includes the absolute and
descriptive unit names.
To display tower information:
At the Switched -48 VDC: prompt, type
show towers
and press
Enter
.
Example
Switched -48 VDC: show towers<Enter>
Tower Tower
ID Name
.A Florida_HQ_1
Creating a descriptive infeed name:
The Set Infeed Name command assigns a descriptive name to an infeed. This descriptive name is displayed when the
Show Traps command is issued.
To create an infeed name:
At the Switched -48 VDC: prompt, type
set infeed name
followed by the absolute infeed name, then a descriptive
name of up to 24 alphanumeric and other typed characters - (ASCII 33 to 126 decimal) are allowed; spaces are not
allowed. Press
Enter
.
Example
The following command adds the descriptive name HQ_1_Infeed_A to the infeed on the unit:
Switched -48 VDC: set infeed name .aa HQ_1_Infeed_A<Enter>
Displaying infeed information:
The Show Infeeds command displays information about all infeeds. This information includes the absolute and
descriptive infeed names.
To display tower information:
At the Switched -48 VDC: prompt, type
show infeeds
and press
Enter
.
Example
Switched -48 VDC: show infeeds<Enter>
Input Input
Feed ID Feed Name
.AA HQ_1_Infeed_A
.AB HQ_1_Infeed_B
.BA HQ_2_Infeed_A
.BB HQ_2_Infeed_B
Displaying the firmware version:
The Version command displays the firmware version.
To display the firmware version:
At the Switched -48 VDC: prompt, type
version
and press
Enter
.
Performing a warm boot:
The Restart command performs a warm boot of the unit.
NOTE:
System user/outlet/group/port configuration or outlet states are
not
changed or reset with this command.
To perform a warm boot:
At the Switched -48 VDC: prompt, type
restart
and press
Enter
.
