-48 VDC Remote Power Manager
Operations
97
Installation and Operations Manual
Setting the directory for the file to be uploaded:
The Set FTP Directory command sets the directory for the firmware file to be uploaded.
To set the FTP directory:
At the Switched -48 VDC: prompt, type
set ftp directory
, followed by the directory and press
Enter
.
Example
The following command sets the FTP directory to ftp://Sentry:
Switched -48 VDC: set ftp directory ftp://sentry<Enter>
Enabling or disabling automatic updates:
The Set FTP Autoupdate command enables or disables automatic firmware update support.
To enable or disable automatic updates:
At the Switched -48 VDC: prompt, type
set ftp autoupdate
, followed by
enabled
or
disabled
and press
Enter
.
Setting the automatic update scheduled day:
The Set FTP Autoupdate Day command sets the day when automatic updates occur.
To set the automatic update day:
At the Switched -48 VDC: prompt, type
set ftp autoupdate day
, followed by
a day of the week or
everyday
and press
Enter
.
Example
The following command sets the automatic update day to Sunday:
Switched -48 VDC: set ftp autoupdate day sunday<Enter>
Setting the automatic update scheduled hour:
The Set FTP Autoupdate Hour command sets the hour of the day when automatic updates occur.
To set the automatic update hour:
At the Switched -48 VDC: prompt, type
set ftp autoupdate hour
, followed by
an hour of the day and press
Enter
.
Examples
The following command sets the automatic update hour to 12 AM:
Switched -48 VDC: set ftp autoupdate hour 12am<Enter>
The following command sets the automatic update hour to 3 PM:
Switched -48 VDC: set ftp autoupdate hour 3pm<Enter>
Testing the FTP upload configuration:
The Set FTP Test command validates that the CDU can login to the FTP server and verify/download the firmware file.
To test the FTP upload configuration:
At the Switched -48 VDC: prompt, type
set ftp test
, and press
Enter
.