-48 VDC Remote Power Manager
Advanced Operations
123
Installation and Operations Manual
LDAP
The -48 VDC products support Lightweight Directory Access Protocol (LDAP) Version 3. This support enables
authentication with LDAP servers; user accounts do not need to be individually created locally on each unit.
This allows administrators to pre-define and configure (in each product and in the LDAP server) a set of necessary
LDAP Groups, and access rights for each. A user’s access rights can then be assigned or revoked simply by making
the user a member of one-or-more pre-defined LDAP groups. User accounts can be added, deleted, or changed in the
LDAP server without any changes needed on individual products.
LDAP support has been tested in the following environments:
Microsoft Active Directory (MSAD)
Novell eDirectory (eDir)
OpenLDAP
LDAP Command Summary
Command
Description
Add GrouptoLDAP
Grants an LDAP group access to one or more groups
Add OutlettoLDAP
Grants an LDAP group access to one or more outlets
Add PorttoLDAP
Grants an LDAP group access to one or more serial ports
Create LDAPGroup
Adds an LDAP group name
Delete GroupfromLDAP
Removes access to one or more groups for an LDAP group
Delete OutlettoLDAP
Removes access to one or more outlets for an LDAP group
Delete PortfromLDAP
Removes access to one or more serial ports for an LDAP group
List LDAPGroup
Displays all accessible outlet/groups/ports for an LDAP group
List LDAPGroups
Displays privilege levels for all LDAP groups
Ping
Verifies proper DNS configuration by name resolution
Remove LDAPGroup
Deletes an LDAP group name
Set Authorder
Specifies the authentication order for each new session attempt
Set DNS
Sets the IP address of the Domain Name server
Set LDAP Bind
Specifies the LDAP bind request
Set LDAP BindDN
Specifies the user account Fully-Qualified Domain Name (FQDN) for binds
Set LDAP BindPW
Specifies the user account password for binds
Set LDAP GroupAttr
Specifies the user class distinguished name (DN) or names of groups a user is a member of
Set LDAP GroupType
Specifies the data type for the Set LDAP GroupAttr command
Set LDAP Host
Sets the IP address or hostname of the Directory Services server
Set LDAP Port
Sets the LDAP server port number
Set LDAP UserBaseDN
Sets the base distinguished name (DN) for the username search at login
Set LDAP UserFilter
Sets the filter used for the username search at login
Set LDAP UseTLS
Enables/disables LDAP over TLS/SSL support
Set LDAP
Enables/disables LDAP support
Set LDAPGroup Access
Sets the access level for an LDAP group
Set LDAPGroup Envmon
Grants or removes access to environmental monitoring
Show LDAP
Displays LDAP configurations
Show Network
Displays network configuration information for all IPv4 and IPv6 settings