-48 VDC Remote Power Manager
Operations
47
Installation and Operations Manual
Shutdown
The
Configuration > Shutdown
page allows the setup of settings required to enable and support the Remote
Shutdown feature for the orderly shutdown of outlets.
Enabling/disabling remote shutdown for an individual outlet:
Check the Shutdown/Delay checkbox for the individual outlet name to enable remote shutdown support and click
Apply
. To disable remote shutdown for the outlet, clear the checkbox.
Setting the remote shutdown delay for an individual outlet:
Type the number of seconds (valid range is 30 to 900 seconds) for shutdown delay for the individual outlet name and
click
Apply.
Enabling/disabling the remote shutdown script delay for an individual outlet:
Check the Script/Delay checkbox to for the individual outlet name to enable shutdown script support and click
Apply
.
To disable the script delay for the outlet, clear the checkbox.
Setting the remote shutdown script delay for an individual outlet:
Type the number of minutes (valid range is 30 to 900 minutes) for shutdown script delay for the individual outlet name
and click
Apply.
Set the target server host:
Provide the hostname or IP address for the target server and click
Apply
.
NOTE:
For global control of all outlets, do the following:
To enable remote shutdown for all outlets, click Shutdown/Delay
All
.
To disable remote shutdown for all outlets, click Shutdown/Delay
None
.
To enable script delay for all outlets, click Script/Delay
All
.
To disable script delay for all outlets, click Script/Delay
None
.
