Adding serial port access to an LDAP group
The Add PortToLDAP command grants an LDAP group access to the serial port.
To grant serial port access to an LDAP group:
At the Sentry: prompt, type
add porttoldap
console
and a group name. Press
Enter
.
Deleting serial port access for an LDAP group
The Delete PortFromLDAP command removes an LDAP group’s access to the serial port. You cannot
remove access to the serial port for an administrative level group.
To delete serial port access for a user:
At the Sentry: prompt, type
delete portfromldap console
and a group name. Press
Enter
.
Displaying outlet, outlet group and serial port access
The List LDAPGroup command displays all accessible outlets, outlet groups and serial ports for an
LDAP group.
To display outlet, outlet group and serial port access:
At the Sentry: prompt, type
list ldapgroup
, optionally followed by a group name. Press
Enter
.
Example
The following command displays information about the LDAP group PowerUser:
Sentry: list ldapgroup poweruser<Enter>
Username: PowerUser
Outlet Outlet
ID Name
.A1 DataServer_1
.B1 WebServer_1
Groups:
ServerGroup_1
ServerGroup_2
More (Y/es N/o): Y
Ports:
Port Port
ID Name
Console Console
Members of the PowerUser LDAP group may access the following outlets, outlet groups and serial
ports: outlet A1 which has a descriptive name of DataServer_1, outlet A2 which has a descriptive name
of WebServer_1, group ServerGroup_1 group ServerGroup_2 and Console serial port.
Sentry PT22
Advanced Operations
•
61
Installation and Operations Manual
Summary of Contents for Sentry PT22
Page 44: ......
