Interfaces
The PT22 has two interfaces: the HTML interface accessed via the HTTP enabled Ethernet connections
and the command line for serial and Telnet connections.
Outlet Naming and Grouping
For commands requiring an outlet name, you may specify it in one of two ways: a predefined absolute
name or a descriptive name assigned by an administrator.
For units with multiple infeed connectors, absolute names are specified by a period (.) followed by the
tower letter,
the infeed letter
and outlet number.
Example:
The absolute name for outlet 8 on the B infeed of tower A is .AB8.
Outlets may also be included in one or more named groups of outlets, enabling you to issue a command
that affects all outlets in a named group.
Usernames and Passwords
The PT22 has one predefined administrative user account (username/password: admn/admn) and supports
a maximum of 128 defined user accounts
NOTE: For security, Server Technology recommends removal of the predefined administrative user account after a new
account with administrative rights has been created.
Only an administrative-level user may perform operations such as creating/removing user accounts and
command privileges, changing passwords and displaying user information. An administrator may also
view the status of all sensors and power inputs.
Usernames may contain from 1-16 characters and are not case sensitive; spaces are not allowed.
Passwords may contain up to 16 characters, and are case sensitive.
10
•
Operations
Sentry PT22
Installation and Operations Manual
Summary of Contents for Sentry PT22
Page 44: ......