Page 4
PUMP ASSEMBLY
WASH ALL PARTS
PROPERLY BEFORE USE.
See page 7.
into pump housing discharge tube.
Place loop of fitting around peg
on end of discharge tube to secure.
INSERT DISCHARGE FITTING
5
INSERT PINCH VALVE
1
into pump housing.
TIP: Squeeze the pinch valve
open before installation to
ensure it isn’t stuck shut.
Wrap loop
around lower
opening to
secure dome.
INSTALL DOME
2
Press dome into
housing fully.
Ensure valve flap
covers bottom
opening.
Lubricate with a small amount of clean water.
Rotate and position until both pegs on
housing fit into holes on tube.
INSTALL TUBE
3
Lubricate connector with a small amount of clean water.
Rotate and position until both pegs on connector
fit into holes on tube.
INSERT CONNECTOR
4
