17
18
T: 0333 577 7232
T: 0333 577 7232
INSTALLATION
ELECTRICAL CONNECTION
Your Washer Dryer requires a 220-240V, 50Hz mains supply. Do not use any other supply.
Your Washer Dryer may be fitted with a moulded plug, which cannot be rewired.
If the fuse cover becomes damaged, you must not use the plug.
If your plug requires changing because it is not suitable for your socket, or it is damaged,
you should consult a qualified electrician.
Fuse:
Replacement fuses should be ASTA-approved to BS1362 and have the correct 10 Amp
rating.
Replacement fuses can be purchased from an electrical supplier.
The cold water pressure for a normal household system ranges from between 0.1 to 1 MPa. Your
Washer Dryer will run at optimum efficiency in this range.
Once you have made all of the connections, carefully turn your cold water supply on and check
for leaks.
