39
40
T: 0333 577 7232
T: 0333 577 7232
USAGE
Cancelling a Programme:
To cancel a programme while it is running:
1
Turn the programme dial to the top position. The programme will stop.
2
Turn the programme dial to any programme. Your Washer Dryer will discharge any water
left from the cancelled programme.
Programme End:
Your Washer Dryer will automatically stop once the selected programme has finished. The
digital display will flash
End
.
Removing Your Laundry:
1
Turn the programme selection dial to the off (0) position. Your Washer Dryer door lock will
automatically be released approximately 2 minutes after the programme has finished.
2
Pull the door handle forwards and open the door fully.
3
Remove your laundry; check that all items have been removed from the drum. Any items left
in the drum could discolour items in the next wash or become discoloured themselves.
4
Check the drum and door seal for any small articles that may have become dislodged.
5
Leave the door open for a short time to allow the interior of your Washer Dryer to dry. Check
the drum is dry and empty before closing the door.
Power Supply Failure:
If a power cut should occur while a programme is running, the programme will continue from
the same point once power is restored. This will not cause any harm to your Washer Dryer or
laundry.
During a power cut, the door lock mechanism will release after 2 minutes. Do not open the door
if there is water in your machine. If you wish to collect your laundry, drain your Washer Dryer
first. Page 36 contains instructions on how to drain your machine.
