Remove float ball assembly.
To remove the float ball assembly, loosen lower the hose
clamp on the float ball assembly with the
short-handled
screwdriver
and remove assembly.
Note: It is not necessary to remove the float ball assembly
to access the pump. However, we recommend removing
the assembly and cleaning it every time you inspect and
clean the pump.
If you are servicing the float ball assembly, use a
Philips
screwdriver
to remove the float ball housing retaining
screw and remove the float ball housing. Rinse all
components clean and ensure float ball moves freely
inside housing. Reinstall float ball housing.
Loosen upper pump outlet hose clamp with the
short-
handled screwdriver
and pull the hose off the outlet.
SP004 HVE3000
7
Dri-Eaz Products, Inc.
