background image

2

 

WARNING!

To reduce the risk of fi re, electric shock, or injury:
  Do not leave the machine unattended when it is plugged in.  Unplug the unit from the outlet when 

not in use and before servicing.

  Never turn on the solution pump without fi rst connecting either the priming hose or your solution 

hose to your machine and to your tool.  

  Always turn off the pump and release the pressure in the pump before disconnecting hoses
  Never add water over 130° F/54° C to the solution tank.
  Always use chemicals or water with a pH between 5 and 10.
  Extension cords must be 12/3 and no longer than 50 feet.  Replace the cord or unplug immediately 

if the ground prong becomes damaged.

  To avoid electric shock, do not expose to rain or snow.  Use and store indoors.
  Do not allow to be used as a toy.  Close attention is necessary when used near children.
  Use only as described in this manual.  Use only the manufacturer’s recommended attachments.
  Do not use with damaged cord or plug.  If the machine is not working as it should, has been dropped, 

damaged, left outdoors or dropped into water, return it to a service center.

  Do not pull by the cord, use the cord as a handle, close a door on the cord, or pull the cord around 

sharp edges or corners.  Do not run the machine over the cord.  Keep the cord away from heated 

surfaces.  To unplug, grasp the plug, not the cord.

  Do not handle the plug, the cord, or the machine with wet hands.
 

Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, 

hair, and anything that may reduce air fl ow.

  Keep loose clothing, hair, fi ngers, and all parts of body away from openings and moving parts.
  Do not pick up anything that is burning or smoking, such as cigarettes, matches, hot ashes, or any 

health endangering dusts.  Do not use to pick up fl ammable or combustible liquids such as gasoline 

or use in areas where these liquids may be present.

  Turn off all controls before unplugging.
  Use extra care when cleaning on stairs.
  Connect to a properly grounded outlet only.
  Liquid ejected at the spray nozzle could be dangerous as a result of its temperature, pressure, or 

chemical content.

 IMPORTANT SAFETY INSTRUCTIONS

This machine is only suitable for commercial use, for example in hotels, schools, hospitals, factories, shops, 
and offi ces.  The Advantage 1200 is not intended for normal residential housekeeping purposes.

NOTE: Read all instructions before using this machine.

When using any electrical appliance, basic precautions should always be followed, including the following 
warnings

FORM NO. 56041937 - SERVPRO 879

Summary of Contents for 879











Reviews: