4
SESAMO
DUALCORE
MACHINES DIRECTIVE
The technician installing the motorization of a door becomes the constructor of the automatic door in
accordance with directive 2006/42/CE and must:
-
Provide the Technical File with the documents indicated in appendix VII of the
Machines Directive and save them for at least 10 years.
-
Edit the CE declaration of conformity according to appendix II-A of the machines
directive and issue a copy to the user.
-
Affix the CE mark to the motorized door in accordance with point 1.7.3 of appendix
I of the machines directive.
-
In particular, but not exclusively, if under regulation EN16005 it becomes
necessary to install a monitored sensor/s, it must be connected and set up as
described in this manual (see pp. 16-17), checking that they operate correctly as
described in the manual of the sensor/s used.
DECLARATION OF INCORPORATION (DIRECTIVE 2006/42/CE, APPENDIX II, PART B)
Manufacturer:
SESAMO S.R.L.
Address:
Str. Gabannone 8/10 - 15030 Terruggia - AL
Declares that:
The product
DUALCORE LH100/LH140/RD100
- is made to be incorporated in a machine to construct a machine considered by Directive 2006/42/CE
- conforms with the essential safety requirements indicated in appendix I of the directive with the
exception of the following points: 1.2.4.3, 1.2.4.4, 1.3.4, 1.3.5, 1.3.7, 1.3.8.2, 1.4, 1.5.3, 1.5.7, 1.5.14,
1.5.15, 1.5.16
- complies with the conditions of the following other CE Directives: 2014/30/UE Electromagnetic
Compatibility, 2014/35/UE Low Voltage
and that
- the following (parts/clauses of) agreed regulations have been applied:
EN 60335-1
EN 61000-6-2
EN 50366
EN 61000 -6
–
3
EN16005
and also declares that:
- the relevant technical documentation has been completed in accordance with part B of appendix VII;
this documentation, or parts of it, will be delivered electronically or by traditional post upon justified
request from the competent national authorities
- the relative technical documentation will be compiled by: SESAMO SRL, Strada Gabannone, 8/10 -
15030 Terruggia (AL) - Italy
- it is not permitted to use the product until the machine in which it will be incorporated or will become
a component of has been identified and has received the declaration of conformity with the conditions
of Directive 2006/42/CE and the national legislation that transposes it, in other words, until the
machinery referred to in this declaration forms a single unit with the machine.
SESAMO S.R.L.
Aldo Amerio
November 2019
(Manager)
Summary of Contents for DUALCORE LH100
