By default, the miniK10 is set to Locker Mode. The miniK10 can easily be set to
Personal Mode with either of the two below steps:
1. Before battery tab is removed, hold down key, pull the tab
and key the key pressed 3 seconds
2. Convert lock to Personal Mode at any time by entering in
MasterCode 1 0
Attention:
0
*
#
0
1) Enter your 4-digit user password.On fi rst use factory default is <1-0-1-0>
2) Rotate handle within 5 seconds to opening direction and there will be a
confi rmation beep.
If personal mode is selected, press and old password. Press button again
and enter new 4-digit user password. Press button again and approve new
password. You will get a confi rmation beep and green LED light will blink.
Below illustrations show examples of lock installed for right
handed door. Lock can be installed for left or right handed
Personal mode |
OPENING WITH USER PASSWORD:
Personal mode |
CHANGING USER PASSWORD
USER PASSWORD
1
2
NEW USER
OLD USER
5
Summary of Contents for Minik 10
Page 1: ...CABINETS LOCKERS BOXES Operating manual The easy lock in every aspect ...
Page 14: ...CABINETS LOCKERS BOXES Installation The easy lock in every aspect ...
Page 17: ...Surface Mounting Semi Flush Mounting 17 ...
Page 20: ...Joint erect lock assembly measurements 22 mm axle cam 38 mm axle cam 20 ...