By default, service password is not active. Activate with Program 5.1. Service password
allows lock to be opened only and none of lock features can be programmed.
If service password function is active, 1) press button and enter current5-digit
service password and press button. 2) Rotate handle within 5 second to opening
direction. You will get a confirmation beep from lock and green LED light will blink.
When you have selected service password in program menu, press button twice
and enter current 5-digit service password. Press button again and enter new
5-digit service password. Press button again and approve new password. You will
get a confirmation beep from lock and green LED lights will blink.
Service password:
opening with service password:
Default <1-0-1-0-1>
changing service password:
NOTE: WHAT HAPPENS IF USER FORGETS THEIR PASSWORD?
Locker Mode (Multiple User):
Use Master code to unlock and turn handle to open position. Lock is now ready for
next user to enter in their unique code..
Personal User Mode:
1) Use master code to reset the lock to factory defaults. MasterCode 4 0
2) Default user code is now < 1-0-1-0 > and can be changed.
#
#
SERVICE PASSWORD
OLD SERVICE
NEW SERVICE
1
2
6
Summary of Contents for Minik 10
Page 1: ...CABINETS LOCKERS BOXES Operating manual The easy lock in every aspect ...
Page 14: ...CABINETS LOCKERS BOXES Installation The easy lock in every aspect ...
Page 17: ...Surface Mounting Semi Flush Mounting 17 ...
Page 20: ...Joint erect lock assembly measurements 22 mm axle cam 38 mm axle cam 20 ...