EN © 2022 SETTY
All rights reserved.
3in 1
Inductive charger
10
4.2 Use
Do not place metal objects on the induction charger as this may damage it.
While charging, the charger and the device being charged may heat up. This is a normal
phenomenon.
The device offers the possibility of wireless charging of phones, a case for wireless
headphones and smartwatches. A suitable cable is required to charge wireless watches,
which is not included.
To use a smartphone inductive charger, place your Qi inductive charging compatible
device on the dedicated charging area. The charging process will start automatically and
will be signaled by the green LED on the left side of the device lighting up.
To use the headphone case's induction charger, place the case on the dedicated charging
area on the right side of the device. The charging process will start automatically and will
be signaled by the green LED on the right side of the device lighting up.
In order to use the smartwatch induction charger, remove the bottom flap of the device
and pull the induction charging cable dedicated to your device through the hole in the
smartwatch charging place, and insert the charging connector in the charger housing.
Then arrange the cord in the grooves on the bottom of the unit so that it is fully wound up.
Insert the plug of the cable into the USB-A connector on the underside of the device.
Finally, snap the bottom flap of the device and put the smartwatch on the charging area.
In special cases, there may be a need for a different location of the device being charged.
In this case, follow the instructions provided with the device.
5. Troubleshooting
In case of any problems with the device, please read the tips below.
The device does not
turn on
Check that the power cord is not damaged.
Check that the power source is working properly.
Ładowanie
indukcyjne nie działa
Check that the distance of the induction operation
range has not been exceeded (e.g. by using additional
housings on the device being charged). Check that the
device is Qi-compliant.
The used AC adapter probably does not have the
appropriate technical parameters.
If the problem persists, please contact the service
center.
If the problem persists, please contact the service center.
6. Device maintenance
The device may only be cleaned with a dry cloth or paper towel. It is not allowed to use
water or any other liquids to clean the device. Do not submerge any parts of the device in
water. Cleaning and maintenance can only be carried out when the device is turned off.
Avoid very high temperatures as they can shorten the life of the electronic components of
the device or melt the plastic parts.
