64
(3) Append: Continuously output bar codes;
(4) Auto clear: Automatically clear the last bar code before the next bar
code scanning starts;
(5) Booted start: Automatically turn on the Scan tool when booting up;
(6) Show type: Display the bar code type while scanning;
(7)Filter invisible Char: Filter the invisible bar code characters;
(8) Filter the first and last space of the bar code: Filter the first and last
space of the bar code;
(9)Stop scan on up: Loosen scan button and the scan lighting immediately
turns off, or press scan button and the scan light continues for a certain
time range (set Scan duration ) before turning off;
(10) Loop scan: Automatically scan bar code continuously; if switch on
continuous lighting mode in Basic settings and then scan with continuous
lighting;
(11) Interval: Set time delay between two scans;
(12) Restore the bar code default settings: you can restore the bar code
default settings, as shown in Figure 8-5;
(13) Bar code suffix: Add bar code output suffix on your own (They can
be numbers, letters, special characters, etc.);
(14) Bar code prefix: Add bar code output prefix on your own (they can
be numbers, letters, special characters, etc.);
(15) End Char: you can choose the bar code to end the output, including:
