8
Installation
Refer to the included custom drawing package for specific
dimensions and instructions for your custom product.
1. Verify that the wall is prepared appropriately. If the product is
an in-wall, or “Recessed” configuration, verify the dimensions of
the rough opening.
2. Install mounting brackets according to the dimensions and
instructions shown on “Sheet 3” of the included drawing
package. Ensure mounting brackets are securely fastened using
wood framing members where possible.
NOTE: Take care when moving the product. Always transport the
product with at least two people.
WARNING: Always transport the product in a vertical position.
Moving the product in an unsupported horizontal position may
result in product flex or damage.
3. Connect power supplies and audio/video components.
• Testing all electrical and electronic devices to verify proper
integration and functionality before securely mounting it to
the wall is strongly recommended.
4. Position Television Mirror close to wall surface and securely
engage mounting brackets.
• Allow for a ¼" ventilation gap for proper air flow and heat
transfer.
5. Check to ensure the Television Mirror is fully engaged and
secure to the mounting brackets.
6. Reference the appropriate electronics manual for Television
Mirror operating instructions.
NOTE:
All Séura drawing packages indicate generalized nominal residential wood framing construction, and are not indicative of any
particular building code. It is the installers responsibility that all electrical, audio/visual, and framing construction are code
compliant to the municipality in which the product is being installed. Modifications made to Séura recommendations are at the sole
discretion of the installer and release Séura of all liability.
21" BRACKET LENGTH
36"
24"
158"
33"
138"
7"
10"
7"
3"
6"
27"
112"
112"
A
MIRROR OUTLINE
LOCATE
POWER &
A/V WITHIN
THIS AREA
WALL SURFACE
DETAIL A
SCALE 1 : 1
VERTICAL DIMENSIONS ARE TO
CENTER OF MOUNTING SLOTS
B
178"
34"
DETAIL VIEW
TV POWER PLUG
SCALE 1 : 2
INSTALLATION INSTRUCTIONS:
Reference the dimensions on this
•
sheet to properly locate the wall
brackets on the mounting surface.
Wall brackets must have mounting
•
screws in both end slots.
If it is not possible to mount to the
•
wall framing members, use the
supplied toggle bolts into minimum
½-inch thick drywall. Toggle bolt
instructions are included in the
fastener packet.
Hold mirror assembly close to wall,
•
connect A/V and power, and verify
functionality.
Hang mirror assembly. Ensure the
•
brackets are interlocked and mirror
is secure.
Attach magnetic side panels.
•
31 MAY 2017
22 SEP 2015
Date Created
-
Drawing ID Number
S-S-2436-19.5-V2
Model Number
Revised Date
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DOCUMENT
IS THE SOLE PROPERTY OF THE MANUFACTURER. ANY
REPRODUCTION IN PART, OR AS A WHOLE, WITHOUT
THE WRITTEN PERMISSION OF MANUFACTURER, IS
PROHIBITED.
TOLERANCES
(UNLESS OTHERWISE NOTED)
FRACTIONAL: 1/8"
ANGULAR: 1.0
TWO PLACE DECIMAL: .03"
THREE PLACE DECIMAL: .015"
SHEET
3
MAGNET
MAGNETIC SIDE PANEL
(SHOWN REMOVED)
RIGHT ANGLE TV POWER PLUG
B
178"
34"
DETAIL VIEW
TV POWER PLUG
19" High-Definition TV Specifications
Screen Size (Diagonal): 19-inch
Format: 16:9
Brightness: 700 cd/m2
Viewing Angle: 170° Horizontal/Vertical
Contrast: 4000:1
Response Time: 6ms
Native Resolution: 1920 X 1080
Backlight: LED
Menu Languages: English, French, Spanish
Tuner:
ATV: NTSC
Digital: ATSC/QAM
Video:
75 Ohm Coaxial Antenna X 1
Composite Video, Audio L, Audio R (RCA plugs) X 1
Component YPbPr (RCA plugs) X 1
VGA 15-pin D-sub Female X 1
HDMI Type A X 2
USB Type A X 1
S-Video Mini 4-Pin DIN X 1
Audio:
Amplified Internal Speakers: 2 X 5W
Amplified Output for External Speakers: 2 X 5W
Amplified Output: Terminal Block
Constant Line Output: 3.5mm Jack X 2
Control:
RS232: 9-pin DB9 Female X 1
IR IN: 3.5mm Jack X 1
IR OUT: 3.5mm Jack X 4
Power:
Input: 100-240 VAC, 50-60Hz, 1.5A
Type A NEMA Plug
Requires GFCI Protected Outlet
INTERLOCKING
MOUNTING
BRACKETS
31 MAY 2017
22 SEP 2015
Date Created
-
Drawing ID Number
S-S-2436-19.5-V2
Model Number
Revised Date
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DOCUMENT
IS THE SOLE PROPERTY OF THE MANUFACTURER. ANY
REPRODUCTION IN PART, OR AS A WHOLE, WITHOUT
THE WRITTEN PERMISSION OF MANUFACTURER, IS
PROHIBITED.
TOLERANCES
(UNLESS OTHERWISE NOTED)
FRACTIONAL: 1/8"
ANGULAR: 1.0
TWO PLACE DECIMAL: .03"
THREE PLACE DECIMAL: .015"
SHEET
2
www.seura.com
PH. 920.857.9069
FAX 920.857.9490
24"
36"
5"
978"
2118"
4116"
1578"
4116"
19" TV
APERTURE
1/2" LIFT-OFF CLEARANCE REQUIRED
112"
Drawing ID Number
Item and Description
Revised Date
Reseller
SHEET
1
DATE:
SIGNATURE:
NOTE:
PLEASE SIGN AND DATE THIS PAGE BEFORE RETURNING TO SEURA, SIGNIFYING YOU AGREE TO ALL
SPECIFICATIONS SHOWN ON ALL DRAWING SHEETS. THE BUILD PROCESS WILL NOT BEGIN WITHOUT AN
AUTHORIZED SIGNATURE. FOR DRAWINGS THAT REQUIRE REVISIONS, SEND THE REVISIONS TO SEURA
NOTED ON THE ORIGINAL DRAWINGS. A REVISED DRAWING PACKAGE WILL BE RE-SENT FOR SIGNATURE.
TOLERANCES
(UNLESS OTHERWISE NOTED)
FRACTIONAL: 1/8"
ANGULAR: 1.0
TWO PLACE DECIMAL: .03"
THREE PLACE DECIMAL: .015"
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DOCUMENT
IS THE SOLE PROPERTY OF THE MANUFACTURER. ANY
REPRODUCTION IN PART, OR AS A WHOLE, WITHOUT
THE WRITTEN PERMISSION OF MANUFACTURER, IS
PROHIBITED.
-
Date Created
-
22 SEP 2015
31 MAY 2017
S-S-2436-19.5-V2
24"(W) X 36"(H) Surface-Mounted TV Mirror with 19" TV and Vanishing Vanity Glass
