6
Display Requirements
Operation and Storage Requirements
The ambient temperature for operating the device is between 41 to 122 degrees Fahrenheit. Do not install the device in the proximity
of heat sources, such as heating pipes, heaters, furnaces or other devices that radiate heat. Mount the device in such a way that it
is protected against moisture. Trouble free operation is ensured up to 75% air humidity. To prevent fire or electric shock, never allow
liquids to enter the unit. The product must be stored in dry and well-ventilated rooms, without extreme temperature fluctuations. Heat
sources and aggressive active substances may not be stored in the proximity of the device. The required storage temperature is 32° F -
140° F at an air humidity of 5 - 85% RH non-condensing. The device must be stored in the complete packaging, as delivered.
Installation Environment
Avoid direct light or sun exposure, direct proximity to heat sources, outdoor installation. The product is specifically designed for indoor
use only. There is the danger of fire and of electric shock and damage to the device if it is operated outdoors. Do not place any heat
sources such as radiators and heat registers, etc. near the monitor. To reduce eye strain, avoid installing the Séura Television Mirror
against a bright background such as a window. Position the monitor at the height of your eye level. Position the monitor directly in front
of you at a comfortable viewing distance.
Installation
Have this product installed by qualified personnel only. Use the mounting systems which are specified or recommended by Séura.
Install the product in a way that it is fixed properly and take care that children are not exposed to danger. Please take extra care during
installation, avoid impacts. Before cabling your monitor, check that the power is off. To avoid any possibility of electric shock, always
connect your equipment to properly grounded outlets. Use of power cords or adapters other than those provided may cause fire or
malfunction. Place this product as close to the power socket as possible. Leave enough space to insert and remove the power plug on
demand. Even if you switch off the product with your remote control, power is not cut off unless the power cord is unplugged.
The device may only be operated with the provided power adapter. The rated voltage is indicated on the product label. The device is
factory-set to the optimal operating voltage (see Technical Specification). Use only power cords and plugs that are suitable for your
local electrical outlets. Install the power cords in such a way that it does not obstruct anyone. Ensure furthermore that the cable is
not clamped and that it cannot be pulled out accidentally from the power adapter. Do not install the power cords in the proximity of
heating elements and never place heavy items on the cable or power adapter. Do not modify or arbitrarily repair the power cords.
CAUTION
Do not use any power cords or adapters other than those provided with this product! Use of power cords or adapters other than
those provided with this product may cause fire, electric shock or malfunction. If several kinds of power cords are provided with this
product, use the one that fits your power socket. Do not let the adapter hang down while using. Do not cover or wrap the adapter.
Leave space around the adapter to prevent overheating. The individual components can be destroyed, if the polarity is reversed or an
incorrect connection is used. A goodwill replacement is not possible in such cases, since each device is submitted to meticulous quality
inspections prior to shipping. The connecting plugs must be attached in such a way that the connector is held firmly. Have trained
technical personnel install the electrical facilities necessary for mounting. The power adapter must be installed in ventilated areas due
to heat emission. Connect the power cord to a grounded outlet. Never cut or damage the power cord.
Please disconnect the device from the power adapter in the following cases:
1. The device is out of use for a lengthy period.
2. The device malfunctions or displays other unusual features, necessitating maintenance work.
3. During a thunderstorm.
Please plan the positioning of the power adapter and the source cables before proceeding with the structural measures and positioning
of the Séura Television Mirror. Observe the protection zones when placing the power adapter! For in-wall applications please bear in
mind that the power adapter has to be placed beyond the inset due to heat emission. Optional 50’ adapter extension cables may be
purchased from Séura.
NOTE
The power adapter should be adequately secured to prevent it from becoming unstable and/or falling. Make sure the power source
circuits are properly grounded. Use the supplied power cord in order to connect it to the power source. If your installation requires
a different power cord, be sure to use an officially approved power cord displaying the mark of the safety agency that defines the
regulations for power cords in your country. Please consider that the AC outlet for the power adapter is placed within reach of the Séura
Television Mirror and should be easily accessible in case it needs to be powered off.
Install the unit in a dry environment where the operating ambient temperature will not exceed 40°C / 104°F. Also, don’t position the
power adapter on top of the Séura monitor system in order to prevent thermal overload. Ensure that your installation complies with
your national and local safety rules. Any servicing, adjustment, maintenance or repair must be performed only by service-trained
personnel.
Ensure the power adapter is installed in an accessible location, to access it easily in case of a defect. If you choose to place the power
adapter in a separate space, take care that ventilation is present, because the power adapters need convection cooling for stable
working conditions.
When placing the power adapter in a fully enclosed space, make sure the air flow around the sides and top of the power adapter is not
restricted. According to a common rule of thumb please calculate the length of the power adapter plus an additional gap of at least
150mm all around for DC 19V power adapters.
