background image

13

Connecting Video

The television features one Component, one Composite, one VGA, one coaxial 

Cable/Antenna input, and two HDMI inputs. We recommend using the HDMI 

inputs for best video and sound quality.

Connecting Audio

Two passive loudspeakers can be connected 

to the speaker output socket with speaker 

cables. Observe the polarity (+ and -) of the 

connections to avoid phase errors (= incorrect 

stereo playback).

Note: This product is not equipped with built-

in speakers.

Connecting a Home Automation System

With the RS-232 interface (9 pin d-subminiature connector female) you can 

connect a serial cable for communication with a home automation system, PC, 

etc. The baud rate is 115200.

Connecting IR Output (blue)

Using the IR (infrared) output terminals on the TV, you can operate components 

of your audio video system that are not in the line of sight of the remote control. 

The IR sensor on the TV will receive IR commands from a remote and distribute 

them to the 3.5mm IR output terminals located on the TV. For most devices, 

use an IR emitter with a 3.5mm mono plug. Attach the IR emitter side to the IR 

receiver of the device to be controlled and attach the 3.5mm mono plug to the 

TV’s IR output. Alternately, if the device being controlled has 3.5mm IR input, 

simply use a male-to-male 3.5mm mono plug to connect the TV and device.
IR output tip is signal and sleeve is ground.

Connecting IR Input (pink)

Using the IR (infrared) input terminal on the TV, you can control the TV using IR 

commands sent from a keypad, IR receiver, or other AV control system. Attach a 

3.5mm mono plug into the TV’s IR input and use the discrete IR codes provided 

at seura.com/download-center.
IR input tip is signal and sleeve is ground.

Making Connections

Connecting a USB Media Source

Connect an external USB media source to the USB socket to display photos, 

play music or install a software update.
In order to have access to the USB port after installation we recommend 

installing a USB extension cable.

Speaker 

Wire Input

-

-

-

-

+

+

+

+

R

R

L

L

Euroblock Connector

Control System

IR Receiver, Keypad, or 

other AV System Control

Video 

Source

Cablebox or 

Smart Device

Summary of Contents for Hydra IWT-19.6




















Reviews: