10
Installation
IMPORTANT: THIS PRODUCT MUST BE MOUNTED TO A PROPERLY RATED CEILING STRUCTURE. The structure
must be able to support five times the weight of the television and the mount combined. A professional
installer or structural engineer should inspect or verify the requirements of the wall.
CEILING MOUNT TEMPLATE
Refer to the included Installation Guide for complete instructions
Optional: Using the keyhole locations, drill
the additional holes for the support screws.
Insert and fasten two screws without
washers until approximately 1/2" remains.
Optio
na
l K
ey
ho
le S
lot
Optio
na
l K
ey
ho
le S
lot
IMPORTANT:
HANDLE THE TV IN A VERTICAL POSITION TO AVOID DAMAGE TO THE
SCREEN. IF PLACING THE TV SCREEN-SIDE DOWN OR LEANING AGAINST A WALL DURING
INSTALLATION, COVER THE SCREEN WITH A PROTECTIVE CLOTH OR BLANKET.
Step 2: Mount Ceiling Plate to Ceiling
1. Choose mounting location
Place the template in the desired location on
the ceiling.
Wood Joist/Truss Mounting:
At least four hole locations must be fastened
to joists/trusses
or an appropriately stabilized
structure. Verify the center of the wood beam
using an edge-to-edge stud finder. Mark all
hole locations in the template slots with a
pencil on the ceiling.
Concrete, Stone or Brick:
All six hole locations must be fastened. Mark
all hole locations in the template slots with a
pencil on the ceiling.
