18
Step 1: Identify wall mounting location.
Step 2: Attach wall mounting hardware.
Step 3: Attach the two wall mounting brackets to the soundbar.
Mark the wall where you want to hang the soundbar. Using a level and a pencil, mark two holes 23.9" apart
for soundbar model SSB-1 or 30.2" apart for soundbar model SSB-2. When installed, the top of the soundbar
will sit approximately 2.5" higher than the screw location. The bottom of the soundbar will be approximately
3.0" lower than the screw location.
Wall mounting hardware is not included. Drill anchors and screws that support the weight of the soundbar
into the wall. The keyhole slots on the two wall mounting brackets will be used to hang the soundbar on
the wall.
Each bracket has three tiny holes to screw through. Use the provided six 6-32 screws and Philips #2
screwdriver to tighten the wall mounting brackets to the soundbar.
Optical
Digital
Audio Input
Aux In
Power
Input
Micro
USB
adhesiv
e!
push
