SEVERIN AT 2287, Instructions For Use Manual

10

too big, as they may become stuck in the 

toaster. The thickness of the slices to be 

toasted should not exceed 14 mm. 

∙

In case of problems or malfunctions 

during use, and before cleaning, 

always remove the plug from the wall 

socket.

∙

 To remove a slice caught in the slot, use 

a blunt wooden implement (e.g. a brush 

handle). Never touch the metal heating 

elements.

Before using for the 

fi

 rst time

∙

 Clean the toaster thoroughly (see 

Cleaning and care

).

∙

 Switch on the toaster without any 

bread inserted and go through at least 

fi

 ve toasting cycles at the maximum 

temperature setting.

∙

 Allow the toaster to cool down between 

cycles.

∙

 When switching on the appliance for the 

fi

 rst time, the toaster may emit a slight 

smell and a little smoke, but this will 

disappear after a short while. Ensure 

suf

fi

 cient ventilation.

Automatic switch-off

This appliance comes with an automatic 

switch-off feature. If a bread slice should 

become stuck and cannot be ejected after 

the toasting cycle is complete, the toaster will 

automatically switch off. Should this occur, 

disconnect the appliance from the mains and 

remove the bread slice as described in the 

section 

General information

.

Adjusting the degree of browning

The desired degree of browning can be 

varied by turning the adjustable browning 

control knob.

Light:  turn the control knob anti-clockwise.

Dark:  turn the control knob clockwise.

In the case of sliced bread speci

fi

 cally 

intended for toasting, we recommend setting 

the browning control to position 

4

. 

Operation

∙

 Insert the plug into the wall socket. 

∙

 After adjusting the browning control, insert 

the bread into the toast slot and press the 

operating lever down. 

∙

 Once the desired degree of browning 

is reached, the toaster switches off 

automatically and the slices are ejected. 

∙

 To achieve regular browning when 

toasting several slices in succession, 

allow the toaster to cool down for 60 - 90 

seconds after each cycle. 

∙

 Do not cover the toast slot during 

operation. 

Interrupting the toasting cycle

If you want to interrupt the toasting cycle, 

press the eject button ( ). The toaster will 

switch off and the slices are ejected.

Warming up rolls, buns etc 

∙

 To warm up buns, rolls or other bakery 

items, push the slide control operating 

lever for the warming top all the way down 

to raise the bread roll holder.  

∙

 Place the items to be warmed up on 

the top, adjust the browning control to a 

medium setting and then push down the 

operating lever to switch on the toaster.

∙

 Once the browning cycle is complete and 

the appliance has automatically switched 

off, turn the roll or bread over and repeat 

the cycle.

∙

 After use, return the bread roll holder