8
Hand blender
Dear Customer,
Before using the appliance, please read the
following instructions carefully and keep this
manual for future reference. The appliance
must only be used by persons familiar with
these instructions.
Connection to the mains supply
Make sure that the supply voltage
corresponds with the voltage marked on the
rating label.
This product complies with all binding CE
labelling directives.
Familiarisation
1. Turbo
button
2. Blender with handle
3. Power cord with plug
4. Hand blender arrest
5. Base
stand
6. Tilt
arm
7. Snap-in hook on tilt arm
8. Locking button for tilt arm
9. Blender mounting aperture
10. Attachment drive sockets
11. 2 kneading hooks
12. 2 beater attachments
13. Blender bowl (plastic or stainless-steel,
depending on model)
14. Multistage switch
15. Eject button
Important safety instructions
∙
In order to avoid hazards, repairs
to this electrical appliance or its
power cord must be carried out by
our customer service. If repairs are
needed, please send the appliance
to our customer service department
(see appendix).
∙
To avoid the risk of electric shock, do
not clean the appliance with water
and do not immerse it in water.
∙
The attachments may be cleaned
in hot, soapy water. For detailed
information on cleaning the
appliance, please refer to the section
C
leaning and care
.
∙
Always switch the appliance off and
remove the plug from the wall socket
-before
fi
tting or removing any
attachments,
-in case of any malfunction,
-during cleaning,
-when there is no supervision,
-after each cycle of use.
∙
Caution:
Any misuse can cause
severe personal injury.
∙
The appliance may only be used
by persons with reduced physical,
sensory or mental capabilities, or
lacking experience and knowledge,
if they have been given supervision
or instruction concerning the use of
GB
