socket, never pull on the power cord;
always grip the plug itself.
●
Do not place the appliance on any
surfaces sensitive to heat during or
immediately after use.
●
This appliance is not intended for use by
any person (including children) with
reduced physical, sensory or mental
capabilities, or lacking experience and
knowledge, unless they have been given
supervision or instruction concerning the
use of the appliance by a person
responsible for their safety.
●
Children should be supervised to ensure
that they do not play with the appliance.
●
No responsibility will be accepted if
damage results from improper use, or if
these instructions are not complied with.
●
This appliance is intended for domestic
use only and not for commercial
applications.
●
In order to comply with safety
regulations and to avoid hazards, repairs
of electrical appliances must be carried
out by qualified personnel, including the
replacement of the power cord. If repairs
are needed, please send the appliance to
one of our customer service departments.
The addresses can be found in the
appendix to this manual.
Dryer models with IONIC function
The IONIC function facilitates gentle, easy
hair styling by preventing a static charge in
the hair. It uses the build-up of a negative
‘ion-cloud’ to prevent ‘flyaway’ hair caused
by a positive charge.
The IONIC function is automatically
enabled during use, irrespective of the switch
settings.
Styling nozzle
The styling nozzle can be fitted to the air
outlet to facilitate shaping the hair during
blow drying.
Volume diffusor
The volume diffusor is also fitted to the air
outlet.
The volume diffusor is used to maintain the
volume of the hair. Move the diffusor with a
slightly circular motion over the head.
Air-flow and temperature controls
By using different combinations of the air-
flow and temperature controls, various
settings are possible when drying the hair.
The air-flow control regulates the air-flow
intensity, while the temperature control
regulates the heat of the air-flow.
With the air-flow control set to the ‘
0
’-
position, the hair-dryer is switched off.
Cool function
The cool function can be used at any time
during the drying process. It will supply
cooler air, which helps firming and shaping
the hair.
Operation
Connect the hair dryer to a suitable wall
socket and select the desired power setting
with the switches integrated in the handle.
Cleaning and care
●
Before cleaning the hair dryer, remove
the plug from the wall socket and let the
appliance cool down completely.
●
To avoid the risk of electric shock, do not
clean the hair dryer with water nor
immerse it in water.
- If necessary, the housing of the hair dryer
may be wiped with a dry lint-free cloth.
- The air intake grill can be removed to
facilitate cleaning. To remove, turn the
grill anti-clockwise. Remove any
accumulated lint particles or hair.
Replace the grill after cleaning and turn it
clockwise to lock.
Disposal
Do not dispose of old or defective
appliances in domestic garbage;
this should only be done through
public collection points.
8
Summary of Contents for HT 6006
Page 3: ...3 1 2 3 8 6 5 4 7 9 ...
Page 42: ...I M No 8166 0000 ...
