36
GB
10. Re-install the grill insert after cleaning. Ensure that
• the ‚V‘-marking faces towards the front of the unit (fig. 9),
• the insert is pushed down all the way and correctly seated (fig. 9).
Fig. 9:
Fitting the grill insert correctly
9.3 After use: cleaning the interior
After use, and also if the appliance is not going to be used for some time, we
recommend opening the cleaning flap and thoroughly cleaning the interior of
the appliance.
WARNING!
If the interior components are not cleaned on a suf-
ficiently frequent basis, there is a hygienic risk, and
the fire danger increases; in addition, it will become
more and more difficult to remove old dirt particles.
– The interior components should therefore be
cleaned regularly, and also each time the unit is
not going to be used for some time.
1. Disconnect the unit from the mains.
2.
Wait for around 30 minutes until the interior components, including the
fat tray, have cooled down to room temperature.
Fig. 10: Unlocking the cleaning flap
3. Use a suitable screwdriver to loosen the fixing screw (fig. 10) at the rear
of the appliance.
4. Open the cleaning flap and ensure that it remains open.
5.
Clean the interior of the appliance with a cloth and a grill cleaning agent;
take note of any user information on the cleaner packaging.
6.
Where stubborn dirt is found, allow the cleaning agent some time to take
effect.
7. Wipe clean with a dry, lint-free cloth afterwards.
8. Close the cleaning flap.
9. Tighten the fixing screw (fig. 10).
