- 18 -
DVD Play Operation
Preparation
1.
Install the unit in the kitchen; refer to page 38 for details.
2.
After connecting the unit to the AC power, turn on the unit’s power by pressing
the POWER button on the front panel or the remote control.
3.
Press the DVD button on the remote control or the SOURCE button on the front
panel to shift to DVD mode.
4.
Press the
EJECT button on the front panel or the remote control to open the
disc tray.
5.
Load the disc with the labelled side facing up.
6.
Press the EJECT button again to close the disc tray. The player will automatically
search for the disc and start playback.
DVD disc Playback
Menu
Normally there is a selecting menu for DVD discs. You can press the MENU/FAV
button on the remote control to enter the root menu during DVD disc playback, and
use the direction buttons to highlight an item you would like to select. Press the OK
button to select it.
Title & Chapter
Normally there are several titles in a DVD disc, and several chapters (sections) in a
title. You can select any title or chapter quickly by entering the relevant number.
Audio
DVD discs can contain up to 8 audio bit streams. For Example: English, French ,
Spanish, etc.
To select the audio bit stream you prefer press the AUDIO button on the remote
control during playback. The DVD player will play the next audio bit stream every time
you press the AUDIO button in succession.
Note:
This function is only available for discs that have several audio bit streams
recorded onto it.
Info
Press the INFO button on the remote control for detailed information on the disc
playing. Press it repeatedly to display as follows: Title Elapsed
Title Remain
Chapter Elapsed
Chapter Remain
Display Off.