2
Safety notes
Startup/operation
Operating Instructions – MOVIGEAR
®
classic
12
2.9
Startup/operation
Observe the safety notes in the chapters "Startup" and "Operation" in the documenta-
tion.
Make sure that the present transport protection is removed.
Do not deactivate monitoring and protection devices of the machine or system even
for a test run.
Make sure the connection boxes are closed and screwed before connecting the sup-
ply voltage.
Depending on the degree of protection, products may have live, uninsulated, and
sometimes moving or rotating parts, as well as hot surfaces during operation.
Additional preventive measures may be required for applications with increased haz-
ard potential. You have to check the protection devices after each modification.
When in doubt, switch off the product whenever changes occur in relation to normal
operation. Possible changes are e.g. increased temperatures, noise, or oscillation. De-
termine the cause. Contact SEW‑EURODRIVE if necessary.
When the device is switched on, dangerous voltages are present at all power connec-
tions as well as at any connected cables and terminals. This also applies even when
the product is inhibited and the motor is at standstill.
Mechanical blocking or internal safety functions of the product can cause a motor
standstill. Eliminating the cause of the problem or performing a reset may result in the
drive re-starting automatically. If, for safety reasons, this is not permitted for the drive-
controlled machine, first disconnect the product from the supply system and then start
troubleshooting.
Risk of burns: The surface temperature of the product can exceed 60 °C during opera-
tion.
Do not touch the product during operation.
Let the product cool down before touching it.
2.10
Magnetic fields
The device contains permanent magnets that create strong magnetic fields even when
de-energized. Magnetic fields may pose a health risk. This especially applies to per-
sons with active medical implants. During operation, additional electromagnetic fields
are generated.
Observe DGUV (German Social Accident Insurance) regulation 15 – "Electromagnetic
fields" for use in industrial workplaces. In other countries, the corresponding national
and local regulations and provisions must be complied with.
25805134/EN – 07/2018
Summary of Contents for MGFAT1-DSM-C/PE
Page 2: ...SEW EURODRIVE Driving the world...
Page 123: ......
