8
PROFINET IO configuration
PROFINET IO controller – configuration
Manual – PROFINET IO Interfaces, Field Distributors
90
7. Select the process data configuration required for your application from the hard-
ware catalog (see the following application example).
19209928843
ð
An empty module must be assigned to unused slots.
8. Save the configuration.
9. Expand your application program by the data exchange with the MFE PROFINET
IO interfaces.
10. Save the project and load it into the PROFINET IO controller.
Now, the "BUS-F" LED of the MFE PROFINET IO interface should go out. If not,
check
•
the PROFINET wiring,
•
the LED "link/act.",
•
and the configuration (especially the set device name)
22870857/EN – 12/2016
