6
Manual – MOVIPRO® SDC with DeviceNet Interface
1
Right to claim under limited warranty
General Information
1.3
Right to claim under limited warranty
A requirement of fault-free operation and fulfillment of any rights to claim under limited
warranty is that you adhere to the information in the manual. Therefore, read the manual
before you start operating the device!
1.4
Exclusion of liability
You must comply with the information contained in the manual to ensure safe operation
of the MOVIPRO
®
units and to achieve the specified product characteristics and perfor-
mance requirements. SEW-EURODRIVE assumes no liability for injury to persons or
damage to equipment or property resulting from non-observance of this manual. In such
cases, any liability for defects is excluded.
1.5
Copyright notice
© 2009 – SEW-EURODRIVE. All rights reserved.
Copyright law prohibits the unauthorized duplication, modification, distribution, and use
of this document, in whole or in part.
1.6
Other applicable documentation
This manual does not replace the detailed operating instructions. Only electrical special-
ists are allowed to install and start up MOVIPRO
®
observing the applicable accident pre-
vention regulations and the MOVIPRO
®
SDC operating instructions.
1.7
General safety notes for bus systems
This communication system allows you to match MOVIPRO
®
SDC to the specifics of
your application. As with all bus systems, there is a danger of modifications to the pa-
rameters that are not visible from outside (in relation to the inverter), which give rise to
changes in the inverter behavior. This may result in unexpected (not uncontrolled) sys-
tem behavior.
